<?xml version="1.0" encoding="UTF-8" ?>
<feed xmlns="http://www.w3.org/2005/Atom">
<link href="https://ubervo.nl/nl/producten/dental-und-medical-solutions/blanks-discs/pritidenta/pritimultidisc-zro2-multi-translucent/?sAtom=1" rel="self" type="application/atom+xml" />
	<author>
		<name>uberVo dental b.v.</name>
	</author>
	<title>priti®multidisc ZrO2 Multi Translucent</title>
	<id>https://ubervo.nl/nl/producten/dental-und-medical-solutions/blanks-discs/pritidenta/pritimultidisc-zro2-multi-translucent/?sRss=1</id>
	<updated>2026-04-15T03:34:10+02:00</updated>

	<entry> 
		<title type="text">priti®multidisc ZrO2 Multi Translucent</title>
		<id>https://ubervo.nl/nl/producten/cadcam-/blanks-discs/pritidenta/pritimultidisc-zro2-multi-translucent/2980/pritimultidisc-zro2-multi-translucent?c=762</id>
		<link href="https://ubervo.nl/nl/producten/cadcam-/blanks-discs/pritidenta/pritimultidisc-zro2-multi-translucent/2980/pritimultidisc-zro2-multi-translucent?c=762"/>
		<summary type="html">
		<![CDATA[
			
							The combination of 3Y-TZP (Translucent with very high strength) and 5Y-TZP (High Translucent with very high translucency) gives a highly aesthetical effect and reliable strength for an unrestricted range of indications. In addition to a smooth transition between the layers wit...
					]]>
		</summary>
		<content type="html">
		<![CDATA[
			The combination of 3Y-TZP (Translucent with very high strength) and 5Y-TZP (High Translucent with very high translucency) gives a highly aesthetical effect and reliable strength for an unrestricted range of indications. In addition to a smooth transition between the layers within the blank or restoration, this product also has good masking qualities and high stability throughout the blank. Materiaaleigenschappen: Zirconium dioxide Type II, Class 5 according to DIN EN ISO 6872 Bending strength: typical mean value &gt; 1,100 MPa Translucency gradient from 49% Thin wall thicknesses of 0.4 mm in the anterior region and 0.6 mm in the posterior region for single crowns Precise margins and edges due to highly compressed material Veneering is possible with any ceramic material compatible with the CTE 10,5 ± 0,5 ·10-6·K-1 of ZrO₂ Cross-batch shade fidelity Homogeneous staining Consistently reproducible shades Biocompatible Materiaalsamenstelling: Zirconium dioxide (ZrO2/HfO2): 89.89 - 94.65 % Yttrium oxide (Y2O3): 4.65 - 10.11 % Aluminum oxide (Al2O3): Other oxides: Important instructions for correct use under the following points: Systems must be constructed of the following specifications: Crowns Maryland-bridges Bridges Minimum framework thickness anterior 0.4 mm 0.4 mm 0.6 mm Minimum framework thickness posterior 0.6 mm 0.6 mm 0.6 mm Connectors anterior 6 mm² 6 mm² Connectors posterior 9 mm² 9 mm² Framework design Anatomically shaped (supporting veneer ceramics); fully anatomica Milling: Reduce feed rates during rough machining: The quality of milling depends on several factors including the machine, machining strategy, zirconium dioxide, etc. To ensure that you can achieve optimum milling results from the start with high translucence blanks, we recommend using a lower speed than with opaque materials during rough machining. Coated milling tools: These offer the benefit of low wear with longer tool life. Job Rough machining Occlusal/cavity Rough machining Residual material Tool diameter 2.5 mm 1.0 mm Parameter: ↓ ↓ Spindle speed 20,000-22,000 rpm 20,000-22,000 rpm Feed rate 1,200-1,500 mm/min 1,000-1,300 mm/min Infeed rate 1,000 mm/min 700 mm/min Allowance 0.15 mm 0.15 mm Tool path distance 1.00 mm 0.20 mm Step down/step over 1.00 mm 0.50 mm Recommendation for standard sintering: Heating and cooling rate 10°C/min Hold time 120 minutes at 1,450°C Total sintering time approx. 7 hours Recommendation on rapid sintering: (for bridges with up to 3 pontics) Heating rate 10°C/min Hold time 30 minutes at 1,500°C Cooling rate 40°C/min Total sintering time approx. 4 hours Sintering together with other materials could cause unwanted changes in color and translucence. This applies particularly to materials processed using dye liquids. Sintering beads must also be replaced to avoid dye liquid residues.It is particularly important to clean sintering furnaces that are contaminated by dye liquids before sintering a pre-shaded material for the first time. This prevents unpleasant surprises and allows optimum photo-optical results for the zirconium dioxide. Fixing: Restorations can be cemented conventionally with a zinc phosphate or glass ionomer cement or with self-adhesive and fully-adhesive fixing material. Veneering: Any ceramic veneers recommended for zirconium dioxide ceramics may be used. Verpakkingsinhoud: Per stuk Dit medische hulpmiddel mag uitsluitend worden verkocht voor verwerking door daarvoor opgeleide vakmensen, freeslaboratoria of -centra die zijn geautoriseerd voor de verwerking van gebitsprothesen.
		]]>
		</content> 

			</entry>
	

</feed>
